Ex barrier and intrinsically safe pressure sensors ? an inseparable pair

Within the European Community, intrinsically safe pressure sensors may only be utilized in hazardous areas if they are installed together with an Ex barrier. The mix of pressure sensor and Ex barrier must meet up with the ?Proof of intrinsic safety? relative to the 94/9/EC ATEX directive. Not absolutely all combinations of sensor and barrier from different manufacturers fulfil this condition.
On the main one hand, it may be that the safety or Ex characteristic values usually do not match, alternatively, the functional characteristics must match your application. So, even if the safety-related data match, the couple of Ex barrier and pressure sensor might not match since, for instance, both components work ?passively?.
(Additional information on the subject ?active?/?passive? can be found in the blog article ?Electrical circuitry for pressure sensors: when is a sensor active, so when passive??)
Therefore, you should make sure that you only use barriers and sensors together whose safety-related data and function-related data match one another. We therefore directly recommend, in our intrinsically safe pressure sensors? Insult , a potentially compatible intrinsically safe Ex barrier.
If you have any more questions, our sales department will gladly will give you detailed application consultation.

Leave a Comment